Posted tagged ‘zellij’

Oh so busy

November 29, 2009

Unit 1 assessment is due on December 8th. I’ve started a draft for the curation page for this. So far it’s going ok. There’s a lot that needs to be said but I can’t make it too lengthy so need to word things wisely and use the space efficiently with only those posts linked in it that will best illustrate my progress and developments.

Oh and it’s Eid – so obviously I am planning to take it easy for a couple of days.

I am currently in the middle of making the larger Icosahedron. I’ve had to rack my brain about what pattern will work the best and in the end after spending ages over-complicating things for myself I decided to just do a very simple one for now. Then if/when this turns out ok I can concentrate on trying a more complex one.

Icosahedron prep

Using the Icosahedron template I downloaded...

I created a larger version on some really thick card. Its A2 and will hopefully hold together much better than ordinary paper or card

...I created a larger version on some very thick card. Can't remember the GSM but believe me this stuff good make a shelter. Each face (triangle) is aprox. 13 cms on each side.

On another note:

The Saturday workshops are now down to the last two sessions. We have chosen our final mediums for applying our patterns to. Adam Williamson and Lateefa Spiker (see examples of her work here: http://www.lateefaspiker.com) demonstrated the many practices we could employ for our work. Amongst these were ceramic tiles, plaster sculptures, stone carving, veneer marquetry (I think that’s what it’s called), and gilding or painting on glass. The following images were taken in the workshop and some of the work is from current or past students. I do not have their names and so cannot state what belongs to who but just be aware that it is the work of students attending the workshop and applying patterns that have been taught by both Richard Henry and Adam Williamson (you can find out more about the classes here: http://www.adamwilliamson.com/42.html)

Plaster casting

Plaster moulding and carving

Stone carving examples

More stone carving

More stone carving

Stone carving by Adam Williamson

Carving of arabesque design in stone by Adam Williamson

cutting veneer

Cutting veneer using templates

Veneer marquetry

Veneer marquetry

Tile making

Tile making and a semi-glazed example

Tile making 2

More tile making

Examples of wood carving

Examples of wood carving

An icosahedron!

An Icosahedron! This one is made from MDF, the pieces cut at an angle to allow the to slot together nice and clean

Zilij tiles

Zellij tiles. I can't imagine how a beginner would achieve breaking the tiles using the chisel and hammer to 'smash/cut' the individual shapes from each piece that would then fit together to create the pattern. Very hard work.

I couldn’t decide which to go for, as there were so many options. But with only a few hours on three Saturdays, I felt as if whatever I chose I would have to rush it. So I thought let me just go for something I may not get another chance to do for a while – stone carving! lol I don’t even know if my biceps are up to it but I’m going to give it my best. So I chose the weave pattern I did a few weeks ago (see here) and so far have transferred it on to a chunk of stone. This is some lovely soft stone that is relatively easy to carve and has a smooth surface and a slightly creamy colouring. It looks really nice so I’m hoping I do a good job of it.

On top of all this I need to do some final tests with the sculptural pieces for the Unit One assessment. So far I have the reflective work but I want to create a 3D shape version to see if that will work in a similar way to the flat/curved sheets I tried a few weeks ago. I’m hoping the Icosahedron will not take too much longer as that will form the basis for my next set of shapes which will also be using reflective sheets.

I have also decided that after this assessment I will concentrate more on the lighting aspect of the installation. I haven’t looked closely enough at this area and feel there is more room for experimentation. As my current time is being occupied with creating patterns and applying these to different materials I need to set myself a deadline in order to keep that work contained and not spend too long on it. I do really enjoy this part of the work a lot though. So once I have pinpointed the lighting sources with satisfaction, and if I have time I will return to the patterns and materials to hopefully produce some interesting and perhaps more complex constructions.

I am also really intrigued with the possibilities that are emerging with combining 2D and 3D shapes. The work has potential in many subject areas so even this is making me think too much.

Anyway I’ll stop it there for now and get back to finishing that Icosahedron.